Equipment & Capabilities
Lane Steel has a wide variety of steel processing capabilities.
Braner Slitter with Leveler*
- Coil weight: 60,000 LB max
- Coil width: .875” to 72”
- Width tolerance: +/- .005”
- Coil thickness: .010” to .250”
- Entrance OD: 80” max
- Entrance ID: 16″ to 30″
- Exit ID: 20” or 24”
- Exit OD: 80” max
*Leveler can correct shape issues (inquire for price)
Octagon Slitting Line
- Coil weight: 50,000 LB max
- Coil width: 1″ to 60″
- Width tolerance: +/- .005”
- Coil thickness: .015” to .150”
- Entrance OD: 72”max
- Entrance ID: 20″ to 24″
- Exit ID: 20″ to 24″
- Exit OD: 72” Max
Paxon Slitting Line
- Coil weight: 30,000 LB max entrance/ 20,000 LB max exit
- Coil width: 1″ to 48.5″ (50” possible depending on the cut)
- Width tolerance: +/- .005”
- Coil thickness: .010” to .115”
- Entrance OD: 60” max
- Entrance ID: 16” to 24”
- Exit ID: 20″
- Exit OD: 60” Max
Red Bud Precision Blanking Line with Voss Leveler
- Coil weight: 50,000 LB max
- Coil width: 12” to 72”
- Width tolerance: +/- .005”
- Coil thickness: .016” to .135”
- Entrance OD: 74” max
- Entrance ID: 20” to 30”
- Slitting width: 3.5” min
- Slitting cuts: 12 max
Stamco Leveling Line with Butech Synergy Leveler
- Coil weight: 60,000 LB max
- Coil width: 16” to 72”
- Width tolerance: cannot be trimmed
- Length tolerance: +/- .1255”
- Coil thickness: .040” to .390”
- Cut Length: 480” max
- Entrance OD: 76” max
- Entrance ID: 24” to 30”
- Square Accuracy: +/- .062”
Cincinnati Sheer
- Sheet width: 1” to 60″
- Sheet length: 1” to 120″
- Thickness : .375″max
Lane Steel offers over 300,000 sq. ft. of storage space for customer material and cranes capable of lifting 32 tons.
- Storage Charges: $2.50 per net ton per month
- Material Transfers: $50 per transfer
- Customer sells material while it is at Lane Steel
Lane Steel has in-house testing equipment to provide quick and accurate results to our customers.
- Rockwell: $25 each
- Used to test the hardness of the steel
- YTE Testing: $50 per piece
- Used to test the yield, tencel, and elongation of the steel
- Samples: $25 each*
- Up to an 8” x 10” sample. Large samples available for an additional fee
- Pictures: $25 per coil
*Cost of shipping not included.
Lane Steel recognizes universally accepted standards for gauge.